Doll Costumes | How to scale dress up masks to fit any size doll

Aren't these just the cutest?  One of my customers gave me the idea for scaling my mask patterns to fit dolls and I think it is just brilliant!

I'm making these doll costumes as part of the children's Christmas presents, I know they're going to love involving their little buddies in their current favourite games of 'superheroes' and 'rescuing'! 

To scale the masks to fit your doll is very easy.  The trickiest part is working out the factor you need to scale by.  All you need to do is measure the doll's face to the width that you want the mask to fit.  Max and Molly's faces were approximately 10cm wide.  Next measure the width of one of the mask patterns that you want to scale.  The batman mask was about 18cm wide.  

To find the factor that you need to scale by, simply divide the width of the doll's face by the width of the mask and multiply the answer by 100:

10 / 18 = 0.55 

0.55 x 100 = 55%

You only need to do this once for each doll that you are sewing for.  The scale will remain the same for all masks for that doll.  

Re-print your mask pattern, but when you get to the print settings screen, select 'Custom Scale' and enter the scale that you calculated above.  I am scaling to 55%:

Once your pattern pieces are printed you can sew the mask as usual according to the directions.  You will, of course, need to adjust the length of the elastic to suit the doll's head.

If you want to try this then you can use the free batman mask pattern HERE or you can purchase any of my mask pattern sets on Etsy.  There are currently Woodland Animals, Fairytale and Superhero Mask pattern sets available.  Spiderman and Wonderwoman are going to be part of the next pattern sets which I will release early next year.

I'm also going to be giving away patterns to 2 lucky readers as part of Sew Mama Sew's Giveaway Day so if you'd like to try your luck you can enter via the rafflecopter below.  Comment here and / or follow Willow & Stitch on Instagram or Facebook for extra chances to win!

a Rafflecopter giveaway

Thank you so much for stopping by.  I'd love for you to take a look around my site.  Check out the Patterns and Tutorials page for lots of free sewing patterns.  Don't forget to head back to Sew Mama Sew when you're finished so that you can enter lots more giveaways!

Here's hoping this festive season leaves you with a full belly and a full heart.

You May Also Like...

Say 'Hello' to Bonnie! (And to a free doll nappy / diaper pattern)

This is Bonnie.  She's a 'Little Amigo' doll from Meg McElwee's 'Growing up Sew Liberated' book.  It's one of my favourite sewing books - so many lovely play things to make for your kids.  I think I might have made them all.... This is the third Little Amigo doll that I've made.  'Max' and 'Molly' are two of my kid's most loved toys.  Our sweet little friend, Brea, always makes a bee line for them whenever she's here too, so it was a bit of a 'no-brainer' when it came to her 3rd birthday present - she simply had to have one too. 

For some reason I always feel compelled to make dolls in the image of the child that they're for - they're always thrilled when they notice that the doll has hair 'just like me!' and eyes 'just like mine!'  

I dressed Bonnie in a miniature Geranium Dress from Made-by-Rae and made her a necklace of tiny colourful pompoms.  She came with a little note which read:

Hello Brea,

My name is Bonnie.  I like cuddles and tea parties.  Will you look after me please?

Xx

P.S. Happy Birthday!

And of course no doll is complete without a set of nappies.  I made 3 so that she can have plenty of changes / coordinate her nappy with her outfit.  They are very quick and easy to make and a fantastic way to use up scraps.  Click on the image below to download your pattern pieces.

This nappy will fit a doll with a waist of up to 35 cm (14") down to about 21 cm (8").  For reference this doll is 45 cm (18")

You will need:

33 cm x 30 cm (13" x 12")  Cotton

33 cm x 30 cm (13" x 12")  Towelling / Fleece / Microfibre lining

2 x 2.5 cm (1") pieces of Velcro (optionally more for smaller sizes - see note on sizing at the end)

Instructions:

Cut 1 piece each from the cotton and from the lining.  Lay them one on top of the other with right sides together.

Stitch right around the edge of the nappy with a 1 cm (1/2") seam allowance.  Leave edges open between the notches on the long side of the nappy.

Clip corners and curved edges, taking care not to cut through your line of stitching.

Turn nappy to the right side using a knitting needle / chopstick to push out the corners.  Press, folding under the seam allowance at the turning hole.  Pin closed.

Edge stitch right around the nappy, sealing the turning hole as you go.  

Affix velcro to the nappy, placing the loops on the lining of the back (long) edge and positioning the velcro a few mm in from your edge stitching line.  Place hooks on the right (cotton) side of the nappy front (short edge) - again positioning them a few mm in from the edge stitching.  Sew all 4 pieces of velcro in place, sewing right around the edge twice for strength.

If you wish to make this nappy for a smaller doll than this one you will need to adjust the velcro accordingly.  The velcro loops on the back (lining) of the nappy can stay as above and then you can either sew a 16 cm (7") length of velcro right across the top of the front of the nappy, or you can cut a shorter length and simply sew a single piece in the middle of the top front of the nappy. 

My kids will spend hours playing with their 'babies' and changing their nappies.  I'm always especially pleased when my little boy plays with 'Max' - his little amigo doll! I'm not sure why I love it so much, I think it's for the same reason that I love seeing my little girl playing with cars or playing superheros - It's always so nice to see them just enjoying what they're doing without any reference to gender stereotypes and with no preconceptions of that's a 'girl's toy' or a 'boy's game' and that's precisely how it should be - don't you think?  

You May Also Like...

Kids Clothes Week - Woodland Geranium Dress

I made this lovely Geranium dress for Ella as part of Kids Clothes Week.  This beautiful fabric is Timber Valley in Coral from the Brambleberry Ridge collection by Violet Craft.  I love the little deers, foxes and birds and the metallic gold trees, it's just gorgeous.  And I always love sewing geranium dresses.  I haven't made the pleated skirt version before so I thought I'd give that a go this time.  I finished the back with some lovely shell buttons which actually came from an old necklace of mine that broke - love a good upcycle!

I didn't want to waste any of this lovely fabric so I sewed a miniature version for Ella's doll, Molly.  I love this doll - the pattern is the Little Amigo Doll from Meg McElwee's book, Growing Up Sew Liberated.  I didn't know when I made the doll that Ella's hair would end up just as crazy as Molly's - they are like peas in a pod now!